Tackling waste flows is a key opportunity to slow near-term global warming but will mean rethinking how products and infrastructure are designed, produced, consumed and treated at end-of-life, according to a report from the International Energy Agency (IEA) prepared for COP 31, the United Nations’ annual climate change conference.
COP31, hosted in Antalya, Turkey set new environmental targets for 2035, including halving growth in global waste, raising the share of final energy demand met by electricity from 20% today to 35% and reducing energy consumption intensity in the building sector by at least 25%.
The IEA report: Synergies between waste reduction, resource efficiency and energy systems decarbonisation, estimates that around 2.6 billion tonnes of municipal waste is created globally each year. Its disposal, treatment and incineration account for around 4% of global greenhouse gas emissions, including nearly one-fifth of human-caused methane emissions, a particularly potent greenhouse gas. But the report argues that the real emissions impact is much larger when full value chains are accounted for, with large amounts of energy and resources consumed in producing materials that are used inefficiently and discarded before their full value potential can be achieved.
"Tackling waste is thus a key opportunity to slow near-term global warming and contribute to global net zero goals," the report said. "Transitioning towards a zero waste economy requires rethinking how goods and infrastructure are designed, produced, consumed and treated at end-of-life. Doing so would mean that fewer resources are used, products last longer, materials are reused and recycled, and what was once waste is instead turned into a valuable resource wherever possible," it said.
The report sets out a package of actions which the IEA says could reduce global greenhouse gas emissions by more than 1.5 billion tonnes each year by 2035; comparable to eliminating emissions from half of the world’s car fleet. This would also ease pressures on resources, improve health and local environmental outcomes, create new economic opportunities and generate additional jobs in value-added sectors, and enhance global energy security, it said.
Three "high-potential areas" where progress in reducing waste can be achieved include: preventing waste through better design and more efficient use of materials; improving collection, sorting and recycling to recover valuable resources; and sustainably turning residual organic waste into energy. The report said that by 2035 waste prevention and materials efficiency has the potential to reduce emissions by around 0.7 Gt CO2-eq; greater efforts on recycling across all materials have the potential to reduce emissions by at least 0.4 Gt CO2-eq; and action on sustainable energy recovery from waste could reduce emissions by at least 0.6 Gt CO2-eq annually.
Together, these measures could reduce demand for energy-intensive materials such as steel and cement, help double global plastics recycling by 2035, and enable a fourfold increase in biogases production, the report says.
Five energy-intensive materials-based sectors: steel, cement, chemicals (including plastics), aluminium and paper – account for nearly 20% of global energy-related CO2 emissions today. The IEA said using these materials more efficiently in buildings, vehicles, packaging and other value chains can reduce energy use and emissions associated with their production while cutting waste at its source.
The report does draw attention to the advances being made in tackling food waste, which are among the most developed areas of waste policy, owing in part to the methane emissions associated with organic waste disposal. Under the Global Methane Pledge, launched at COP26, participants committed to taking voluntary action towards reducing global methane emissions by at least 30% below 2020 levels by 2030. The Global Methane Pledge’s Waste Pathway, launched in 2022, focuses on reducing emissions across the waste value chain through measures such as food waste reduction, separate collection of organic waste, anaerobic digestion and landfill methane capture.
However, the IEA says that circularity has received less direct focus to date, with a limited number of recent initiatives, such as the Building Circularity into Nationally Determined Contributions Toolbox, launched at COP28, and the Global Circularity Protocol launched at COP30.
IEA executive director Fatih Birol said: “Governments and businesses have the power to accelerate progress towards a zero waste and a circular economy, creating the conditions to waste less, use resources more efficiently and make better use of the waste we do generate. As our analysis shows, progress towards these goals can bring numerous benefits, helping countries strengthen their economic competitiveness while lowering their emissions.”
The report says that realising these opportunities will require more coordinated action tailored to national circumstances. Priorities for governments include shifting incentives and progress indicators to prioritise resource efficiency, encouraging more circular product and infrastructure design and securing finance for waste collection, recycling and sustainable energy recovery.
Further reading:
- Making textile waste more circular
- Circular plastics and chemical recycling: More clarity needed around end-of-waste rules
- Advanced recycling plant turns plastic waste into feedstocks